PE Power study guides
One short guide for each knowledge area of the exam. Each covers what the area asks, the methods worth knowing cold and the mistakes that cost points, then points to free sample questions and the calculators that fit. Every guide comes with a short video lesson, and the overview of the exam is below.
Not sure where to begin? Follow the 16-week study plan, weighted by the exam areas, with an 8-week version for a retake. Then read how to use the Reference Handbook and codes on exam day.
Start here
Circuit Analysis
10–15 questions on the exam
Phasors, three-phase Y and delta, per-unit and change of base, symmetrical components and the power triangle: what to master and how to practise it.
14 practice questions published
Protection
10–15 questions on the exam
Overcurrent coordination, CTs and saturation, differential and distance relaying, fuses and reclosers, and breaker duty with X/R: a practical study path.
13 practice questions published
Transmission and Distribution
8–12 questions on the exam
Line models, voltage drop and regulation, power transfer and angle, reactive compensation, fault current and stability: a study path for T&D.
11 practice questions published
Electric Power Devices
8–12 questions on the exam
Transformer equivalent circuits, percent impedance, regulation, parallel and autotransformer operation, efficiency, and storage and PV ratings explained.
11 practice questions published
General Applications
8–12 questions on the exam
Demand and load factor, the lumen method, grounding electrodes, surge arrester MCOV and protective margin, and present-worth economics in one study path.
11 practice questions published
Measurement and Instrumentation
6–9 questions on the exam
Instrument transformer ratios and meter multipliers, accuracy classes, the two-wattmeter method, meter loading and true RMS: how to study measurement.
8 practice questions published
Rotating Machines
5–8 questions on the exam
Induction motor slip and torque, locked-rotor current and starting methods, synchronous machine power angle and excitation, and DC motor speed control.
8 practice questions published
Power Electronics
5–8 questions on the exam
Six-pulse rectifiers, inverters and PWM, displacement and distortion power factor, harmonics and THD, and how inverter-based resources behave in faults.
7 practice questions published
Electrical Safety has no guide yet. Its questions wait for an NEC review by a professional engineer, and the guide follows them.
Lesson transcript
The narration of “The PE Power exam in 2 minutes”, by chapter.
Introduction
The PE Power exam in two minutes. We will cover how the computer-based exam works, the nine knowledge areas and how much each one weighs, and how to use PhasorPrep to get ready for it.
How the exam works
You take the exam on a computer at a test center. Questions come in mixed formats. Most are multiple choice and some ask you to type in a number or to pick from a list or a diagram. A searchable reference handbook is on screen the whole time, so practice finding formulas in it rather than memorizing them. Rules can change, so check the exam board's current rules before you book.
The nine areas
The exam spans nine knowledge areas and they are not equal. Circuit analysis, protection, and electrical safety each carry 10 to 15 questions. Transmission and distribution, power devices and general applications carry 8 to 12. Measurement and instrumentation carry 6 to 9, and rotating machines and power electronics 5 to 8 each. So spend your time where the points are, but leave no area blank. A weak spot in a heavy area costs more than the same weak spot in a light one, and every area shows up on the exam.
Using PhasorPrep
Here's how to use PhasorPrep. Start with the free diagnostic. 20 questions in 120 minutes spread across the areas by weight. It shows your score in each area and which ones to work on first. Then practice area by area. Every question has a worked solution and a video solution. When your weak areas improve, finish with a timed practice exam to build your pace.
Two study traps
Trap one, studying only the topics you enjoy. Let your diagnostic results, not your comfort, choose your next area. Trap two, reading the solution before you try. Work each question on paper first with the clock running, and only then compare your steps with the solution. Start with a free diagnostic, then practice by area with worked solutions at phasorprep.com.